Design Synthesis of 5.8 GHz Octagonal AMC on a Very Thin Substrate
Keywords:
Artificial magnetic conductor, gain and Radio frequency identification.Abstract
This paper proposed a development of 5.8 GHz
Artificial Magnetic Conductor, AMC using very thin substrate with thickness of 0.13 mm. Different shapes of PEC metallization are discussed in order to achieve the highest bandwidth of unit cell AMC. Another approaches for increasing the bandwidth is by applying the ring patch around the substrate as well as implementing the DGS ground plane. The proposed design produces 1.96 % bandwdith of unit cell. Applying the 2 x 4 unit cell arrangement gives the best result for directivity equal to 6.75 dBi, gain of 6.83 dB, efficiency = 98.41 % and return loss = -45.63 dB.
Downloads
Downloads
Published
Issue
Section
License
You are free to:
- Share — copy and redistribute the material in any medium or format for any purpose, even commercially.
- Adapt — remix, transform, and build upon the material for any purpose, even commercially.
- The licensor cannot revoke these freedoms as long as you follow the license terms.
Under the following terms:
- Attribution — You must give appropriate credit , provide a link to the license, and indicate if changes were made . You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
- No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
Notices:
You do not have to comply with the license for elements of the material in the public domain or where your use is permitted by an applicable exception or limitation .
No warranties are given. The license may not give you all of the permissions necessary for your intended use. For example, other rights such as publicity, privacy, or moral rights may limit how you use the material.
